2003 Toyota RAV4 Ignition Chip Key Transponder Programming Instructions

Call 877-782-5192
To find a locksmith in your area.

How to Program a 2003 Toyota RAV4 Ignition Chip Key Tranponder

Step by Step How to Programming Instructions:

  1. Enter vehicle and close all doors

  2. Insert master Toyota key in and out of ignition cylinder 4 times. On the 5th time leave the master key in the ignition cylinder

  3. Open and close driver’s side door 6 times

  4. Remove master key from ignition cylinder.

  5. Verify that security light on the information display is solid, indicating that the car successfully entered programming mode

  6. Insert new transponder chip key

  7. Watch security light blinking for about 60 seconds

  8. When security light goes out, your new key should be successfully programmed

  9. Remove new key from the ignition cylinder

  10. To verify that your new key is able to deactivate anti-theft system: security indicator light on the information display should disappear when inserting properly programmed key into ignition cylinder

  11. If programming is unsuccessful start over at step 1
 If you need programming instructions for  key fob click here.