2004 Toyota 4Runner Ignition Chip Key Transponder Programming Instructions
Call 877-782-5192
To find a locksmith in your area.
Print Instruction
Description

How to Program a 2004 Toyota 4Runner Ignition Smart Chip Key

Step by Step How to Programming Instructions:
 

  1. Enter vehicle and close all doors

  2. Insert master Toyota key in and out of ignition cylinder 4 times. On the 5th time leave the master key in the ignition cylinder

  3. Open and close driver’s side door 6 times

  4. Remove master key from ignition cylinder.

  5. Verify that security light on the information display is solid, indicating that the car successfully entered programming mode

  6. Insert new transponder chip key

  7. Watch security light blinking for about 60 seconds

  8. When security light goes out, your new key should be successfully programmed

  9. Remove new key from the ignition cylinder

  10. To verify that your new key is able to deactivate anti-theft system: security indicator light on the information display should disappear when inserting properly programmed key into ignition cylinder

  11. If programming is unsuccessful start over at step
 
If you need programming instructions for key fob click here. 
Video
Home | Contact Us | Disclaimer | Privacy Policy