2007 Mitsubishi Outlander Ignition Key Programming Instructions

Call 877-789-9963
To find a locksmith in your area.
Description
How to Program a 2007 Mitsubishi Outlander Ignition Key
 
Step by Step How to Programming Instructions:
 
If your Outlander has a regular key or remote head key system use the following instructions to add a key to the system. However with the remote head key this will only program the key portion of the key but not the remote portion. You will need a locksmith to program the remote portion of the key. Not sure why they did that but they did.
 
Note: You need two previously programmed working Ignition keys to add a third key to the system. If you do not have two working keys you will need to have a locksmith program a second key for you. Click here to find a locksmith in your area.
 
1.  Get your new key cut to match your previously programmed keys.
 
2.  Insert the first previously programmed key in the ignition and turn the key to the ON position (Do not start engine) for 5 seconds and turn it back to the OFF position and remove.
 
3.  Insert the second previously programmed key in the ignition and turn the ignition to the ON position (Do not Start) until the immobilizer indicator light is flashing (within 10 seconds) then turn it back to the OFF position and remove. If an error occurs while the immobilizer light is flashing the immobilizer light will go out, otherwise it should keep flashing. 
 
4.  Within 30 seconds of the flashing indicator light insert the new unprogrammed key in the ignition and turn to the ON position (Do not Start). The immobilizer light should stay solid for about 3 seconds when programming is complete. You then can turn it back to the OFF position and remove. If an error occurs the immobilizer light will flash 3 times, then you must start over from the beginning.
 
5.  Car should now start with new key.
 
6.  Repeat steps 1 thru 5 for each additional new key.  
 
If you have a Smart Key system use the following Instructions:  
 
This vehicle is not on board programmable and requires a qualified professional to program ignition smart key.

1. Locate an automotive locksmith in your area by visiting LocateALocksmith.com

2. If your vehicle is still mobile, it may save you money by driving to the locksmith instead of having them come to you.

3. The locksmith will then hook up specialized computer equipment to your vehicle in order to program the ignition smart key. 
to find a Locksmith in your area.