2021 Ford Bronco Ignition Fob Smart Key Programming Instructions
Call 877-782-5192
To find a locksmith in your area.
Print Instruction
Description
How to Program a 2021 Ford Bronco Ignition Fob Smart Key
 
Step by Step How to Program Instructions:
 
Use this procedure to add a key to the system:  
You must have two previously programmed remote controls inside your vehicle and the new, unprogrammed remote controls readily accessible. Make sure that your vehicle is off before beginning this procedure.
Make sure that you close all the doors before beginning and that they remain closed throughout the procedure. Perform all steps within 30 seconds of starting the sequence.  Stop and wait for at least one minute before starting again if you perform any steps out of sequence.
Note: You can program a maximum of four remote controls to your vehicle.
 
  1. Place the first programmed remote in the backup slot inside the center console. With your foot off the brake pedal, press and release the push button ignition switch.
  1. Wait five seconds and then press and release the push button ignition switch again.
  1. Remove the remote control.
  1. Within 10 seconds, place a second programmed remote control in the backup slot. Press and release the push button ignition switch.
  1. Wait five seconds and then press and release the push button ignition switch again. Keep the ignition on for at least 3 seconds, but no more than 10 seconds.
  1. Remove the remote control.
  1. Place the unprogrammed remote control in the backup slot and press and release the push button ignition switch.
Programming is now complete. With your foot on the brake pedal, press the push button ignition switch to verify the remote control functions operate and your vehicle starts with the new remote control.
If programming was not successful, wait 10 seconds and repeat Steps 1 through 7. 
 
Use this procedure if all keys are lost for this vehicle. 
This vehicle is not on board programmable and requires a qualified professional to program smart key remote fobs.

1. Locate an automotive locksmith in your area by visiting LocateALocksmith.com

2. If your vehicle is still mobile, it may save you money by driving to the locksmith instead of having them come to you.

3. The locksmith will then hook up specialized computer equipment to your vehicle in order to program the smart key remote fob.
Video
Key Fob Not Working?
Have You Tried Replacing the Battery? 
 
Need To Replace Your Key Fob? 
 
Home | Contact Us | Disclaimer | Privacy Policy